신고사유
신고해주신 내용은 쇼핑몰 운영자의 검토 후 내부 운영 정책에 의해 처리가 진행됩니다.
상품명 | 린트 발생량 측정 시험기 Lint Generator and Counter ISO 9073-10(LPA-118) |
---|---|
판매가 | 견적문의 |
월 렌탈 금액 |
월 원 (개월 기준)
|
---|
구매방법 | |
---|---|
배송주기 |
정기배송 할인 save
|
옵션선택 |
(최소주문수량 1개 이상 / 최대주문수량 0개 이하)
사이즈 가이드상품명 | 상품수 | 가격 |
---|---|---|
린트 발생량 측정 시험기 Lint Generator and Counter ISO 9073-10(LPA-118) | 수량증가 수량감소 | 견적문의 ( ) |
|
할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.
Summary
Gelbo Flex Tester System is designed with Jinan Quality Supervision and Inspection
Center for Medical Devices.
The particle counter for use with this Gelbo Flex Tester System is to ascertain the amount
of loose fibres (lint) to shed from non-woven materials in a 30 seconds time period of
flexing.
With non-woven textile joining the traditional lines of products such as plastics, paper,
textiles etc. for uses in healthcare and hygiene, cleaning, filtration, food packaging and
more, cleanliness is an important consideration; therefore, such materials must have a
low propensity to lint.
Using IST160.1 and ISO9073-10:2003, we has designed the Gelbo Flex Tester System
with particle counter for measuring the linting of non-wovens in the dry state. This test can
also be applied to other textile materials.
Application
Experiments of disposable or reuseable surgical bedsheet, surgical clothes and clean
clothes for patients clinical staff and equipments.
Environment of testing
ISO 5 (class 100).
Principal
While the sample is being subjected to repetitive twisting and compression cycles on the
Gelbo Flex Tester, air is withdrawn from the testing chamber and the particles in the air
stream are counted and classified on the particle counter.
Main parts
Gelbo Flex Tester
Flexing Chamber and Air Collector
Airborne Particle counter
Laminar flow bench (optional, it is used to supply ISO 5 clean air)
Standard: IST160.1, ISO9073-10:2003
Introduction of main parts
The Gelbo Flex Tester consists of two 82.8mm dismater mandrels, one fixed and the
other attached to a moveable arm to perform the flexing action. The moveable mandrel
twists and compresses the sample at 60 cycles per min of 180°rotation over 120mm of
stroke toward and away from the fixed mandrel.
The Flexing Chamber and Air Collector measuring 300*300*300mm is made from
plexigalss and has removable panels for cleaning. Three panels have two suitable 10mm
air vents. An isokinetic intake probe (air collector) is fixed to the centre of the flexing
chamber. A purge filter is fitted to the instrument and is used to reduce the amount of
airborne dust/lint within the flexing chamber throughout testing.
Test System in Laminar Flow Bench
게시물이 없습니다
게시물이 없습니다